HP Deskjet 2540 Connect To Wifi | Complete Wifi Solutions

Check the following requirements and carry out the installation steps to establish the HP Deskjet 2540 connect to WiFi.

HP Deskjet 2540 Connect To Wifi Instruction

Check if the computer is turned on and connected to a Wi-Fi network.

Use the same router for connecting the printer.

Ensure that the printer is loaded with paper and installed with ink cartridges.

Open our website on your computer browser and click Download.

Wait until the computer finishes the installation process without clicking the Continue button.

Check if the printer is turned on and press the Wireless and Cancel button together to reset the network settings.

Release the buttons and get back to the HP Installation Connect window.

Click Continue and carry out the instructions on the screen.

Choose the Wireless option under the Connection Option window.

Select Yes on the HP Auto Wireless Connect screen and select Next to complete the installation.

Get the network name and password before you begin with the Wi-Fi connection.
Check if the computer is activated with an Internet connection by the router.
Make sure you use the same network to connect the printer.
Open our website on your computer browser.
On the web page, click the Driver Download button.
Wait until the downloading completes on your system.
Carry out the instructions on the screen to install the driver.
Use the network name and password when the computer prompts you.
Choose your printer name under the Print Using menu.
Get back to the HP Installer screen to complete the remaining steps for a successful installation.

Plug the printer power cord to the wall outlet and not to any surge protector.
Confirm if the printer is placed within the range of the router.
Use the ON button to switch on the HP Deskjet 2540 printer.
Check if the wireless light is blinking on your printer control panel.
Hold the Power button for some time to perform a HP Deskjet 2540 connect to wifi reset.
Simultaneously press Start Copy Black button for about two times.
Again try to press the Cancel button for at least three times.
Release the ON button to complete the reset process.
Wait until the wireless light blinks near the wireless button.
If the wireless light does not blink, repeat the same process.

A network password is provided in a paper by the Internet Service Provider (ISP) when you subscribe to the Internet Service.
You can also find the password below the router on the sticker that is labeled as WPA2 password, WEP key, security password, or Wireless key.
If you are unable to find your password, contact your ISP.
Right-click on the network name that is found at the bottom of the Windows computer screen.
Go to the option called Open Network and Sharing Center and choose the option called Change Adapter Settings.
Right-click on the printer name and do the following Status->Wireless Properties->Security->Show Characters.
The characters on the computer screen are your network password.
If you use a Mac computer, click Finder and then hit the Go button.
Do the following actions to get a password. Utilities->Keychain Access->Local Items->Category Lists->Passwords-> (printer name) ->Show Password.
Enter the admin password under the prompt screen and click OK to show the password on the Mac computer.

The following steps will explain how to solve the HP Deskjet 2540 connect to wifi problems when you try to change any network settings.

Check whether the printer turned on and not in sleep mode.
On the control panel, press the Cancel button.
Locate the Wireless button on the printer control panel.
Press and hold it for at least 3 seconds.
Find the WPS button on the router.
Press and hold for about 3 to 5 seconds.
Wait until the WPS connection starts on the router.
Now press the Wireless button quickly to let the printer search for WPS connection.
Wait until the printer gets connected to the network.
Check if the blue light near the Wireless button lights on stable and work on HP Deskjet 2540 connect to wifi.